EDD 272 Solid Modeling

In this course, students are introduced to the concepts and commands of parametric solid modeling. Students create and add relationships to sketches; extrude the sketches to create models; and add features such as fillets, cuts, chamfers, holes, drafts, shells, lofts, and sweeps. In addition, students extract two-dimensional (2D) documentation from the three-dimensional (3D) models, and add details to the drawings.

Credits

3

Prerequisite

Prerequisite: (EDD 271 and (EDD 142 or EDT 152)) or (EDD 171 and EDT 128)

See Course Syllabus

Course Number and Title:

EDD 272 Solid Modeling

Campus Location

  • Georgetown
  • Stanton

Effective Date

202351

Prerequisites

Prerequisite: (EDD 271 and (EDD 142 or EDT 152)) or (EDD 171 and EDT 128)

Course Credits and Hours

3 credit(s)

2 lecture hours/week

2 lab hours/week

Course Description

In this course, students are introduced to the concepts and commands of parametric solid modeling. Students create and add relationships to sketches; extrude the sketches to create models; and add features such as fillets, cuts, chamfers, holes, drafts, shells, lofts, and sweeps. In addition, students extract two-dimensional (2D) documentation from the three-dimensional (3D) models, and add details to the drawings.

Additional Materials

None

Required Text(s)

Obtain current textbook information by viewing the campus bookstore - https://www.dtcc.edu/bookstores online or visit a campus bookstore. Check your course schedule for the course number and section.

Disclaimer

None

Core Course Performance Objectives (CCPOs)

  1. Design 3D computer-aided design (CAD) drawings with appropriate values for all settings. (CCC 1, 2, 3, 4, 5, 6; PGC CAD 1, 3, 4; DEM 1, 2, 3, 4, 5, 6)
  2. Create a wire frame model. (CCC 1, 2, 3, 4, 5, 6; PGC CAD 1, 3, 5; DEM 1, 2, 3, 4, 5, 6)
  3. Create a surface model. (CCC 1, 2, 3, 4, 5, 6; PGC CAD 1, 3, 5; DEM 1, 2, 3, 4, 5, 6)
  4. Create solid models. (CCC 1, 2, 3, 4, 5, 6; PGC CAD 1, 3, 4, 5; DEM 1, 2, 3, 4, 5, 6)
  5. Create various perspective views and render a drawing. (CCC 1, 2, 3, 4, 5, 6; PGC CAD 1, 3, 4, 5; DEM 1, 2, 3, 4, 5, 6)

See Core Curriculum Competencies and Program Graduate Competencies at the end of the syllabus. CCPOs are linked to every competency they develop.

Measurable Performance Objectives (MPOs)

Upon completion of this course, the student will:

  1. Design 3D computer-aided design (CAD) drawings with appropriate values for all settings.
    1. Set up drawing files using the 3D coordinate system.
    2. Define the different model building and displaying options.
    3. Use the Vpoint command to manipulate the viewpoints.
  2. Create a wireframe model.
    1. Use various methods to generate 3D polygon meshes.
    2. Construct surfaced models using polygon meshes.
  3. Create a surface model.
    1. Create a variety of surface-modeled objects using surf commands.
    2. Construct a detailed surface model using multiple viewports.
  4. Create solid models.
    1. Construct 3D solid primitives.
    2. Edit complex solids.
    3. Create a new solid from the intersection of two or more solids.
    4. Create regions that can be analyzed.
  5. Create various perspective views and render a drawing.
    1. Create scenes using cameras, lights, and surface properties.
    2. Apply surface textures and materials to model.
    3. Create a background for the model.
    4. Map materials onto objects.

Evaluation Criteria/Policies

The grade will be determined using the Delaware Tech grading system:

90-100 = A
80-89 = B
70-79 = C
0-69 = F
Students should refer to the Catalog/Student Handbook for information on the Academic Standing Policy, the Academic Integrity Policy, Student Rights and Responsibilities, and other policies relevant to their academic progress.

Final Course Grade

Calculated using the following weighted average

Evaluation Measure

Percentage of final grade

Summative: Modeling Exercises (Equally Weighted)

40%

Summative 1-2 Exams

30%

Formative: Assessments (homework questions, videos, quizzes or student portfolio) (Equally Weighted)

30%

 

TOTAL

 

100%

Program Graduate Competencies (PGCs are the competencies every graduate will develop specific to his or her major)

CADAASCAD

  1. Prepare detailed, technically accurate drawings aligned with industry standards. 
  2. Perform routine design calculations and analysis with sketches and Computer-Aided Design (CAD) models.
  3. Develop recommendations for design layouts, material selection, and production methods supported by data analysis.
  4. Present analytical data and plans in a method appropriately organized for department and/or client approval.
  5. Demonstrate a commitment to quality, timeliness, professional development, and continuous improvement.

DETAASDEM

  1. Apply the skills, techniques, and modern tools of the discipline to narrowly defined engineering technology activities.
  2. Apply mathematics, science, engineering, and technology to engineering technology problems that require limited application of principles but extensive practical knowledge.
  3. Identify, analyze, and solve narrowly defined engineering technology problems.
  4. Demonstrate a commitment to quality, timeliness, professional development, and continuous improvement.
  5. Demonstrate technical competency in engineering materials, applied mechanics, and manufacturing methods.
  6. Apply in-depth technical competency in applied drafting practice emphasizing mechanical components and systems, as well as fundamentals of descriptive geometry, orthographic projection, sectioning, tolerancing and dimensioning, and computer aided drafting and design.

 

Core Curriculum Competencies (CCCs are the competencies every graduate will develop)

  1. Apply clear and effective communication skills.
  2. Use critical thinking to solve problems.
  3. Collaborate to achieve a common goal.
  4. Demonstrate professional and ethical conduct.
  5. Use information literacy for effective vocational and/or academic research.
  6. Apply quantitative reasoning and/or scientific inquiry to solve practical problems.

Students in Need of Accommodations Due to a Disability

We value all individuals and provide an inclusive environment that fosters equity and student success. The College is committed to providing reasonable accommodations for students with disabilities. Students are encouraged to schedule an appointment with the campus Disabilities Support Counselor to request an accommodation needed due to a disability. The College's policy on accommodations for persons with disabilities can be found in the College's Guide to Requesting Academic Accommodations and/or Auxiliary Aids Students may also access the Guide and contact information for Disabilities Support Counselors through the Student Resources web page under Disabilities Support Services, or visit the campus Advising Center.

Minimum Technology Requirements

Minimum technology requirements for online, hybrid, video conferencing and web conferencing courses.