CPO 106 Statistical Process Control Overview

This course provides a brief overview of basic statistics, including variation, and explains how to transform raw data into control charts for variables or attributes as well as how to determine in-control/out-of-control conditions. Basic problem solving tools such as Pareto analysis and cause and effect (fishbone) diagrams are presented.

Credits

1

Prerequisite

Prerequisite: SSC 100 or concurrent

See Course Syllabus

Course Number and Title:

CPO 106 Statistical Process Control Overview

Campus Location

  • Stanton

Prerequisites

Prerequisite: SSC 100 or concurrent

Course Credits and Hours

1 credit(s)

1 lecture hours/week

0 lab hours/week

Course Description

This course provides a brief overview of basic statistics, including variation, and explains how to transform raw data into control charts for variables or attributes as well as how to determine in-control/out-of-control conditions. Basic problem solving tools such as Pareto analysis and cause and effect (fishbone) diagrams are presented.

Required Text(s)

Obtain current textbook information by viewing the campus bookstore - https://www.dtcc.edu/bookstores online or visit a campus bookstore. Check your course schedule for the course number and section.

Core Course Performance Objectives (CCPOs)

  1. Apply statistical concepts and principles to chemical process operations. (CCC 6; PGC 3, 7)
  2. Interpret control charts to maintain process parameters within standard operating conditions. (CCC 2; PGC 3, 7)
  3. Demonstrate the use of quality problem-solving tools. (CCC 2; PGC 3, 7)

See Core Curriculum Competencies and Program Graduate Competencies at the end of the syllabus. CCPOs are linked to every competency they develop.

Measurable Performance Objectives (MPOs)

Upon completion of this course, the student will:

  1. Apply statistical concepts and principles to chemical process operations.
    1. Explain the quality philosophy of W. Edwards Deming.
    2. Discuss the purpose of the Baldridge and the Delaware Quality Awards.
    3. Provide a brief history of the development of statistical process control (SPC) concepts.
    4. Describe the current uses of SPC by the chemical process industry.
    5. Highlight the importance of measurements.
    6. Calculate averages and measures of dispersion.
    7. Explain the differences between variables and attributes.
    8. Calculate the following statistical values: process distribution, process mean, and process standard deviation.
  2. Interpret control charts to maintain process parameters within standard operating conditions.
    1. Show how to measure variation.
    2. Explain normal versus non-normal variation.
    3. Develop a frequency distribution chart for a data set.
    4. Construct a histogram.
    5. Construct and plot average and range charts.
    6. Determine if a pattern is normal or non-normal.
    7. Explain systematic and random errors.
    8. Identify typical and atypical patterns of process variables.
    9. Explain process capability indices. 
    10. Compute control limits, and construct fraction nonconforming (p) and number nonconforming (np) charts.
    11. Determine the system of data collection and use.
    12. Explain p and np chart interpretations.
    13. Compute control limits and construct c and u control charts.
    14. Explain count type c and u control chart interpretations.
  3. Demonstrate the use of quality problem-solving tools.
    1. Explain the purpose and use of the Pareto and the cause and effect (fishbone) diagrams.
    2. Construct Pareto and the cause and effect (fishbone) diagrams.

Evaluation Criteria/Policies

The grade will be determined using the Delaware Tech grading system:

90-100 = A
80-89 = B
70-79 = C
0-69 = F
Students should refer to the Catalog/Student Handbook for information on the Academic Standing Policy, the Academic Integrity Policy, Student Rights and Responsibilities, and other policies relevant to their academic progress.

Final Course Grade

Calculated using the following weighted average

Evaluation Measure

Percentage of final grade

Summative: Mid-Term Test

 30%

Summative: Final Exam

45%

Formative: QI Macros Statistical Software

15%

Formative: Homework Assignments

10%

TOTAL

100%

Program Graduate Competencies (PGCs are the competencies every graduate will develop specific to his or her major)

  1. Maintain safety, health, and environmental standards during simulation exercises or in a chemical plant.
  2. Handle, store, and transport chemical materials according to all applicable federal, state, and local regulations.
  3. Apply chemical process and quality systems in a chemical process environment or a chemical plant.
  4. Operate, monitor, control, and troubleshoot batch and continuous chemical processes.
  5. Analyze samples of raw materials, intermediates, and finished products in a simulated chemical process environment or a chemical plant.
  6. Perform routine, predictive, and preventive maintenance and service to process equipment and instrumentation.
  7. Use computers and computerized equipment for communications and chemical process control.

Core Curriculum Competencies (CCCs are the competencies every graduate will develop)

  1. Apply clear and effective communication skills.
  2. Use critical thinking to solve problems.
  3. Collaborate to achieve a common goal.
  4. Demonstrate professional and ethical conduct.
  5. Use information literacy for effective vocational and/or academic research.
  6. Apply quantitative reasoning and/or scientific inquiry to solve practical problems.

Students in Need of Accommodations Due to a Disability

We value all individuals and provide an inclusive environment that fosters equity and student success. The College is committed to providing reasonable accommodations for students with disabilities. Students are encouraged to schedule an appointment with the campus Disabilities Support Counselor to request an accommodation needed due to a disability. The College's policy on accommodations for persons with disabilities can be found in the College's Guide to Requesting Academic Accommodations and/or Auxiliary Aids Students may also access the Guide and contact information for Disabilities Support Counselors through the Student Resources web page under Disabilities Support Services, or visit the campus Advising Center.

Minimum Technology Requirements

Minimum technology requirements for online, hybrid, video conferencing and web conferencing courses.