300
Ideation, conceptualization, and development of consumer products. Utilization of freestyle and NURBS based computer-aided design tools to solve product design problems. Writing Intensive. Prerequisite: IET 226; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
IET 226; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Study of methods, materials, tools, and equipment for productivity measurements and improvement. Prerequisites:
IET 170; one of: STA 282, 382, 392; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(3-0)
Prerequisites
IET 170; one of: STA 282, STA 382, STA 392; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
A study of the principles and practices of safety management with emphasis on occupational safety standards and loss control. Prerequisite:
CHM 131 or
CHM 141; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
CHM 131 or CHM 141; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Corequisites
None.
Study of mechanisms with graphical and analytical analysis of displacement, velocity, acceleration, motion, gearing, gear trains, linkages, and cams. Prerequisite:
IET 279 or
EGR 251 with a grade of C- or better; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(3-0)
Prerequisites
IET 279 or EGR 251 with a grade of C- or better; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Introduction to principal concepts and methods of fluid mechanics. Topics include pressure, hydrostatics, buoyancy; mass and momentum conservation; flow through pipes; and pumps. Prerequisites:
IET 281 or
EGR 253;
EGR 200 with a C- or better; Permission of E&T Advisor; cumulative GPA of 2.5 or higher.
Credits
3(3-0)
Prerequisites
IET 281 or EGR 253; EGR 200 with a C- or better; Permission of E&T Advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Study of thermodynamics and basic tools necessary to obtain quantitative solutions to common engineering applications involving energy and its conversion, conservation and transfer. Prerequisites:
PHY 145QR, 175 or
PHY 130QR, 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(3-0)
Prerequisites
PHY 145QR, PHY 175 or PHY 130QR, PHY 170; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Modern house planning resulting in a complete set of plans and specifications. This course is approved for offering in a distance learning format. Prerequisites: permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(1-4)
Prerequisites
Permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Development of the architectural drawing techniques, basic construction methods and materials, details, and planning for light commercial building. Prerequisite: Permission of E&T advisor; cumulative GPA of 2.5 or higher. Recommended:
IET 357.
Credits
3(2-2)
Prerequisites
Permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Design, development and construction of wood prototypes in an advanced area of specialization including: bending, veneering, furniture construction, and use of jigs and fixtures. Prerequisites:
IET 116, 160; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
IET 116, IET 160; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Laboratory and classroom experience designed to develop skills and knowledge relating to noncommercial construction. Field experiences are used when applicable. Prerequisite: permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(1-4)
Prerequisites
Permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
A comprehensive study of construction building code enforcement. Topics will include the permit process, inspection process, and the legal aspects of building code enforcement. This course is approved for offering in a distance learning format. Prerequisite: permission of E&T advisor; cumulative GPA of 2.5 or higher. Recommended:
IET 361.
Credits
3(3-0)
Prerequisites
Permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Introduces basic polymer formulation, properties of plastics materials, methods of molding plastics, and the fabrication and decoration of plastic articles. Prerequisites:
CHM 131 or 141;
IET 130, 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
CHM 131 or 141; IET 130, 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Corequisites
None.
Comprehensive study of the International Building Codes. Topics include International Building, Electrical, Plumbing, Mechanical, and Fire Codes. This course is approved for offering in a distance learning format. Prerequisite: permission of E&T advisor; cumulative GPA of 2.5 or higher. Recommended:
IET 361.
Credits
3(3-0)
Prerequisites
permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Comprehensive study of International Residential Code for One and Two- Family Dwellings. Topics include all residence code requirements for building a home according to IRC 2000. This course is approved for offering in a distance learning format. Prerequisites: permission of E&T advisor; cumulative GPA of 2.5 or higher. Recommended:
IET 361.
Credits
3(3-0)
Prerequisites
permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Introduction to industrial robotics, including robot terms, classifications, coordinate systems, components and operation, and programming. Prerequisites:
CPS 180 or
EGR 200;
IET 291 or
EGR 290; One of:
MTH 132, 133, 217; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
CPS 180 or EGR 200; IET 291 or EGR 290; One of: MTH 132, MTH 133, MTH 217; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Corequisites
None.
Programming and operation of CNC machines, including CNC vertical milling center and turning center. Emphasis on manual programming, CAM design, and machine setup and operation. Credit may not be earned in both
EGR 377 and
IET 377. Prerequisites:
IET 154, 170; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
IET 154, IET 170; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Introduction to methods of determining the internal stresses and deflections of basic load-carrying members of construction and machine applications. Prerequisites:
IET 279 or
EGR 251 with a C- or better;
EGR 200 with a C- or better;
MTH 132 or 133; Permission of E&T Advisor; cumulative GPA of 2.5 or higher.
Credits
3(3-0)
Prerequisites
IET 279 or EGR 251 with a C- or better; EGR 200 with a C- or better; MTH 132 or MTH 133; Permission of E&T Advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Design, construction, operation, and service procedures involved in both reciprocating and rotary engines. Prerequisites: permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(1-4)
Prerequisites
permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
A comprehensive study of discrete devices and circuits, including diodes, transistors, single and multistage amplifiers, frequency response, and integrated operational amplifiers. Prerequisite: IET 292; permission of E&T advisor; cumulative GPA of 2.5 or higher.
Credits
3(2-2)
Prerequisites
IET 292; permission of E&T advisor; cumulative GPA of 2.5 or higher
Corequisites
None.
Individual investigation and research to increase ones technical competency. Prerequisites: Cumulative GPA of 2.5 or higher.
Credits
1-6(Spec)
Prerequisites
Cumulative GPA of 2.5 or higher
Corequisites
None.