AUT 201 Automotive HVAC

This course introduces automotive heating and air-conditioning systems' components, operations, and service procedures. Laboratory experience includes system evaluation, diagnosis, and repair.

Credits

4

Prerequisite

Prerequisite: (ENG 102 or ENG 102 concurrent) and AUT 101 and AUT 102 and (AUT 103 or AUT 103 concurrent and (AUT 104 or AUT 104 concurrent)

See Course Syllabus

Course Number and Title:

AUT 201 Automotive HVAC

Campus Location

  • Georgetown
  • Stanton

Prerequisites

Prerequisite: (ENG 102 or ENG 102 concurrent) and AUT 101 and AUT 102 and (AUT 103 or AUT 103 concurrent and (AUT 104 or AUT 104 concurrent)

Course Credits and Hours

4 credit(s)

2 lecture hours/week

5 lab hours/week

Course Description

This course introduces automotive heating and air-conditioning systems' components, operations, and service procedures. Laboratory experience includes system evaluation, diagnosis, and repair.

Additional Materials

Safety glasses

Required Text(s)

Obtain current textbook information by viewing the campus bookstore - https://www.dtcc.edu/bookstores online or visit a campus bookstore. Check your course schedule for the course number and section.

Disclaimer

None

Core Course Performance Objectives (CCPOs)

  1. Analyze and repair various air-conditioning (A/C) systems. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
  2. Analyze and repair refrigeration system components. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
  3. Analyze and repair  heating, ventilation, and engine cooling systems. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
  4. Analyze and repair HVAC operating systems and climate control types. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
  5. Perform recovery, recycling, and recharging of various refrigerant systems according to the United States Environmental Protection Agency (EPA). (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)

See Core Curriculum Competencies and Program Graduate Competencies at the end of the syllabus. CCPOs are linked to every competency they develop.

Measurable Performance Objectives (MPOs)

Upon completion of this course, the student will:

  1. Analyze and repair the various air-conditioning (A/C) systems.
    1. Identify and interpret heating and air conditioning problems to determine needed action.
    2. Research vehicle service information including vehicle service history, service precautions, and technical service bulletins; and adhere to simulated shop procedures.
    3. Conduct an A/C system performance test to identify potential  problems. 
    4. Diagnose abnormal operating noises in the A/C systems to determine needed action.
    5. Perform refrigerant identification and pressure testing using specified equipment.
    6. Leak test A/C system to determine needed repairs.
    7. Determine recommended oil and oil capacity and inspect oil condition.
    8. Using a scan tool, observe and record related HVAC data and trouble codes.
  2. Analyze and repair refrigeration system components.
    1. Diagnose and service A/C compressor drive belts, pulleys, and tensioners.
    2. Diagnose and service A/C compressor clutch components including compressor clutch air gap to determine needed action.
    3. Perform A/C compressor removal and inspection.
    4. Identify hybrid vehicle A/C system electrical circuits and service/safety precautions.
    5. Determine need for an additional A/C system filter, and determine needed action.
    6. Perform removal of A/C system mufflers, hoses, lines, fittings, O-rings, seals, and service valves to determine needed action.
    7. Inspect for proper A/C condenser airflow.
    8. Perform removal of receiver/drier or accumulator/drier to determine needed action.
    9. Perform removal and service of expansion valve or orifice (expansion) tube.
    10. Inspect evaporator housing water drain to determine needed action.
    11. Determine and explain procedure to remove and reinstall the evaporator.
  3. Analyze and repair  heating, ventilation, and engine cooling systems.
    1. Inspect engine cooling and heater systems hoses and pipes to determine needed action.
    2. Inspect and test heater control valve(s) to determine needed action.
    3. Explain procedure to remove, inspect, reinstall, and/or replace heater core.
    4. Explain heating system operation and service.
  4. Analyze and repair HVAC operating systems and  automatic climate control types 
    1. Test HVAC system blower motors, resistors, switches, relays, wiring, and protection devices to determine needed action.
    2. Diagnose HVAC system clutch control systems to determine needed action.
    3. Diagnose malfunctions in the vacuum, mechanical, and electrical components and controls of the heating, ventilation, and A/C (HVAC) system.
    4. Inspect and test HVAC system control panel assembly.
    5. Inspect and test HVAC system control cables, motors, and linkages.
    6. Inspect HVAC system ducts, doors, hoses, cabin filters, and outlets for proper operation.
    7. Identify the source of HVAC system odors.
    8. Check operation of automatic or semi-automatic HVAC control systems.
  5. Perform recovery, recycling, and recharging of various refrigerant systems according to the United States Environmental Protection Agency (EPA).  
    1. Perform correct use and maintenance of refrigerant handling equipment according to equipment manufacturer's standards.
    2. Identify A/C system refrigerant; test for sealants; recover, evacuate, and charge A/C system; add refrigerant oil as required.
    3. Recycle, label, and store refrigerant.

Evaluation Criteria/Policies

The grade will be determined using the Delaware Tech grading system:

90-100 = A
80-89 = B
70-79 = C
0-69 = F
Students should refer to the Catalog/Student Handbook for information on the Academic Standing Policy, the Academic Integrity Policy, Student Rights and Responsibilities, and other policies relevant to their academic progress.

Final Course Grade

Calculated using the following weighted average

Evaluation Measure

Percentage of final grade

Summative - Minimum 2 Exams (equally weighted)

20%

Summative - Minimum 2 Quizzes (equally weighted)

20%

Summative/Formative -Minimum 5 Repair Order/Worksheets (equally weighted)

30%

Summative Assessments-Minimum 2 Practical Assessments (equally weighted)

30%

TOTAL

100%

Program Graduate Competencies (PGCs are the competencies every graduate will develop specific to his or her major)

  1. Use appropriate automotive diagnostic and service equipment, hand tools, and precision measuring devices to determine and perform the proper repair as necessary.   
  2. Interpret automotive electronic service information, service manuals, and diagnostic charts.
  3. Document service repair procedures that accurately reference the 3Cs.
    1. Customer complaint verification
    2. Correct the problem
    3. Complete the repair.
  4. Employ proper automotive industry service facility safety practices.
  5. Practice professional conduct as required in the automotive industry.

Core Curriculum Competencies (CCCs are the competencies every graduate will develop)

  1. Apply clear and effective communication skills.
  2. Use critical thinking to solve problems.
  3. Collaborate to achieve a common goal.
  4. Demonstrate professional and ethical conduct.
  5. Use information literacy for effective vocational and/or academic research.
  6. Apply quantitative reasoning and/or scientific inquiry to solve practical problems.

Students in Need of Accommodations Due to a Disability

We value all individuals and provide an inclusive environment that fosters equity and student success. The College is committed to providing reasonable accommodations for students with disabilities. Students are encouraged to schedule an appointment with the campus Disabilities Support Counselor to request an accommodation needed due to a disability. The College's policy on accommodations for persons with disabilities can be found in the College's Guide to Requesting Academic Accommodations and/or Auxiliary Aids Students may also access the Guide and contact information for Disabilities Support Counselors through the Student Resources web page under Disabilities Support Services, or visit the campus Advising Center.

Minimum Technology Requirements

Minimum technology requirements for online, hybrid, video conferencing and web conferencing courses.