Course Number and Title:
MET 271 Engineering Project
Prerequisites
Prerequisite: MET 225 and MET 241 and MET 242 and ELC 248
Course Credits and Hours
3 credit(s)
1 lecture hours/week
5 lab hours/week
Course Description
In this course, students participate in small group design in various fields of engineering technology such as machine design, fluid mechanics, pneumatics, hydraulics, electro-mechanics, and structures. Projects are taken from inception through a complete design process, including cost analysis and a final design report.
Additional Materials
None
Core Course Performance Objectives (CCPOs)
- Research and choose among possible projects based on general need, interest, or specific client criteria. (CCC 1, 3, 4, 5, 6; PGC 5)
- Identify project goals, objectives, measurement criteria, and constraints pertinent to the project. (CCC 1, 2, 3, 4, 5, 6; PGC 5)
- Compare and contrast several possible design concepts using the defined objectives, criteria, and constraints. (CCC 1, 2, 3, 4, 5, 6; PGC 4, 5)
- Select a specific design, fully detailing the decisions and reasoning that led to the choice. (CCC 1, 2, 3, 4, 5, 6; PGC 2, 3, 4, 5)
- Carry out the design project, and construct any apparatus involved within the limits of time and budget. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
- Develop a test program with criteria that measures the design against project goals and objectives. (CCC 1, 2, 3, 4, 5, 6; PGC 2, 3, 4, 5)
- Critique the performance of the design, and recommend potential improvements. (CCC 1, 2, 3, 4, 5, 6; PGC 1, 2, 3, 4, 5)
- Prepare and present both a formal written project report and oral presentation detailing all aspects of the project. (CCC 1, 2, 3, 4, 5, 6; PGC 4, 5)
- Use CAD computer software to design individual and mating machine parts. (CCC 1, 2, 6; PGC 4, 5)
See Core Curriculum Competencies and Program Graduate Competencies at the end of the syllabus. CCPOs are linked to every competency they develop.
Measurable Performance Objectives (MPOs)
Upon completion of this course, the student will:
- Research and choose among possible projects based on general need, interest, or specific client criteria.
- Identify problems with existing systems, or find an unmet need.
- Benchmark similar systems.
- Create a decision matrix based on cost, time, and feasibility to justify project choice.
- Identify project goals, objectives, measurement criteria, and constraints pertinent to the project.
- Write a project proposal identifying goals, objectives, criteria, and constraints as they apply to the project.
- Compare and contrast several possible design concepts using the defined objectives, criteria, and constraints.
- Benchmark existing solutions.
- Brainstorm possible solutions.
- Create decision matrices to quantify design choices.
- Select a specific design, fully detailing the decisions and reasoning that led to the choice.
- Write a concept report detailing several possible design concepts using the defined goals, objectives, criteria, and constraints.
- Carry out the design project, and construct any apparatus involved within the limits of time and budget.
- Keep a detailed daily log book of all project activities, which will include the individual work done by team member, minutes of project group meetings, vendor contacts, sources of equipment information and specifications, drawings, calculations, and purchase orders.
- Develop a test program with criteria that measures the design against project goals and objectives.
- Create a list of metrics for evaluating a client's needs/wants.
- Identify a target value or range for each metric.
- Identify activities for measuring metric values.
- Critique the performance of the design, and recommend potential improvements.
- Perform activities to measure metrics.
- Evaluate measurements against target values.
- Redesign any areas that do not meet the criteria.
- Identify methods of optimization for the next iteration of the prototype.
- Prepare and present both a formal written project report and oral presentation detailing all aspects of the project.
- Prepare and submit a formal written group project report.
- Prepare and present a formal group oral presentation on the project using appropriate audio-visual aids.
- Use CAD computer software to design individual and mating machine parts.
- Create structures on CAD software, including dimensions and angles.
- Locate appropriate loads on structures, including magnitude and direction.
- Calculate member forces, and compare results with manual solutions.
Evaluation Criteria/Policies
The grade will be determined using the Delaware Tech grading system:
| 90-100 |
= |
A |
| 80-89 |
= |
B |
| 70-79 |
= |
C |
| 0-69 |
= |
F |
Students should refer to the
Catalog/Student Handbook for information on the Academic Standing Policy, the Academic Integrity Policy, Student Rights and Responsibilities, and other policies relevant to their academic progress.
Final Course Grade
Calculated using the following weighted average
|
Evaluation Measure
|
Percentage of final grade
|
|
Meeting milestones (equally weighted) (summative)
|
35%
|
|
Individual contribution (Logbooks) (formative)
|
30%
|
|
Portfolio (summative)
|
10%
|
|
Presentation (summative)
|
5%
|
|
User manual (summative)
|
5%
|
|
Design (summative)
|
5%
|
|
Drawing creation / machining parts (summative)
|
5%
|
|
NOCTI (National Occupational Competency Testing Institute): standardized test for Engineering Technology. (summative)
|
5%
|
|
TOTAL
|
100%
|
Program Graduate Competencies (PGCs are the competencies every graduate will develop specific to his or her major)
- Safely utilize typical machine shop equipment and manufacturing techniques to accurately manufacture projects.
- Perform calculations of forces to size and select structural components and appropriate materials.
- Perform calculations of all parameters to size components related to various mechanical system designs.
- Interpret and produce good mechanical engineering drawings and effectively create solid models of parts and assemblies.
- Exhibit professional traits, including the ability to work with minimal supervision independently while contributing to team project, using effective problem-solving skills and make appropriate decisions relative to the technical field.
Core Curriculum Competencies (CCCs are the competencies every graduate will develop)
- Apply clear and effective communication skills.
- Use critical thinking to solve problems.
- Collaborate to achieve a common goal.
- Demonstrate professional and ethical conduct.
- Use information literacy for effective vocational and/or academic research.
- Apply quantitative reasoning and/or scientific inquiry to solve practical problems.
Students in Need of Accommodations Due to a Disability
We value all individuals and provide an inclusive environment that fosters equity and student success. The College is committed to providing reasonable accommodations for students with disabilities. Students are encouraged to schedule an appointment with the campus Disabilities Support Counselor to request an accommodation needed due to a disability. The College's policy on accommodations for persons with disabilities can be found in the College's Guide to Requesting Academic Accommodations and/or Auxiliary Aids Students may also access the Guide and contact information for Disabilities Support Counselors through the Student Resources web page under Disabilities Support Services, or visit the campus Advising Center.